JLU Double Triangulated 4-Link Rear Long Arm Bracket Kit RPM Steering

We set out 2 years ago to design a double triangulation for the JLU that solved many challenges and restrictions with the JL platform. We gave up a small amount of belly height (not a flat belly) to achieve better anti-squat and roll center numbers.

The results were incredible and if our recommended rear axle separation is used a 94 anti-squat can be achieved on a JLU. There is no need to remove the body for installation.

Kit includes:

• Rear weld in laser cut cross member with lower link mounts
• Rear weld in upper link frame side mounts
• Truss top 4-link mounts (truss not included)
• Axle side lower control arm mounts
• (1) Skid Plate 1/4 Inch laser cut and CNC broke smooth bottom
• Includes all grade 8/10.9 hardware

Please Note:

• This kit requires:
  • An exhaust modification.
  • Cutting off factory mounts. Welding in new mounts.
  • The side JLU factory fuel tank be removed.
  • Rear axle truss required and sold separately.
• Our skid plate can be modified to work with other front crossmembers
• Evaporative canister will need to be relocated
• This kit DOES NOT INCLUDE control arms or joints. Build your own or order from us when you are ready!