Upper Link Inner Frame Brackets Under Cover Fab

The UCF Upper-Link Inner Frame Brackets were designed to allow you to easily mount your upper links to the inside surface of your frame rails. They allow you to drop an upper link on the frame side without removing the rear link bolt. The mounts are laser cut from 1/4 inch carbon steel plate.

The pieces fit together to create and inner mounting width of just over 2 5/8 inch. This allows for the use of flex joints such as the Currie Johnny Joint or 1 1/4 inch x 1 inch heim joints with high-misalignment spacers. 9/16 inch mounting holes are provided, but they can be oversized easily for larger bolt sizes. The mounts are 4 1/2 inch long and the center of the joints will be located 2 3/8 inch from the side of the frame.

They mount the links at a 20 degree angle from the frame. The brackets are fully gusseted and will ship ready to weld onto your rig. They will be shipped bare of all finishes that would be destroyed by the welding process.

  • Upper-Link Inner Frame Brackets
  • 1/4 inch carbon steel plate
  • Fully gusseted and will ship ready to weld onto your rig
  • Shipped bare
  • Sold As Pair