Jeep Gladiator Falcon SP2 3.5 aDAPT Piggyback Shock Kit 2-3 inch Lift

Gain more control over your suspension tuning with the Falcon SP2 3.5 aDAPT Piggyback Shocks! In addition to the 8-Position Dial, these shocks can be programmed to automatically switch from Soft to a manually preselected Firm setting depending on terrain.

The aDAPT Control Module's 3-position In-Cab Switch

Includes:

  • Soft, Firm, and Auto settings. SP2 3.5 aDAPT: SP2 3.5 aDAPT Piggyback Shocks offer a wide range of adjustability for specific terrain and/or handling characteristics
  • In Auto Setting, the aDAPT Control Module automatically switches from Soft to a manually preselected Firm setting based on driver selectable minimum G threshold
  • The desired Firm setting is controlled manually by the 8-Position Dial aDAPT Control Module adjustment parameters: forward acceleration, lateral acceleration, braking
  • Each parameter is set separately Firm mode duration can be set between 1-5 seconds 3-position
  • In-Cab Switch settings include: Soft, Firm, Auto Can also be manually adjusted from Soft to preset Firm setting
  • Using the Falcon App, multiple presets can be created and used for different driving conditions
  • Calibrate aDAPT Control Module for various install orientations
  • SP2 Mode Adjust tunes compression and rebound for Soft or Performance settings
  • Ideal for daily driven Jeeps as well as the serious enthusiast wanting automatic control and advanced tuning options from the driver seat JT: JT corner-specific shock absorber w/ race-inspired performance
  • Front lower offset eyelet design provides maximum shock body to frame clearance during articulation
  • Rear roost guards prevent shock shaft damage from rocks kicked up by the tires
  • Piggyback: Piggyback design increases oil and gas capacity for reduced heat
  • Flows 6x more oil than restrictive reservoir hose designs
  • Eliminates common leakage issues found in banjo and swivel fittings F
  • ront shocks' unique horizontal piggyback reservoir increases tire clearance

Features and Benefits:

  • SP2 Mode Adjust: Choose between Soft and Performance modes during install
  • Tunes both compression and rebound Soft mode allows a partial bypass of the main piston for a softer ride
  • During aggressive driving, Soft mode retains performance tuning for optimal handling
  • Soft mode recommended for rough terrain/surfaces and cold weather
  • Performance mode recommended for max on- and off-road handling, stability, and control
  • Jeep Performance Shocks: Vehicle-specific shock absorbers
  • Race-inspired performance for increased vehicle stability
  • Improved dynamic roll control and low-speed damping
  • Dramatic improvement in on-road comfort and off-road performance
  • Optimized fitment for unobstructed suspension travel and articulation
  • 2.3 inch shock body provides optimal performance
  • 6061-T6 aluminum alloy shock body resists Impact to protect internal components
  • Smooth honed internal shock body surface for long-term performance
  • 3/4 inch induction hardened chrome plated shaft resists rock damage, corrosion, and shaft buckling
  • Large shaft diameter provides a wide range of adjustment on adjustable shocks
  • Hard anodized 6061-T6 aluminum alloy billet piston
  • 1-piece Teflon bronze piston wear band w/ O-ring
  • VOD (Volume Optimized Damping) features a digressive linear piston for quicker ramp-up and increased damping volume
  • VOD reduces shock bottoming at full compression or over uneven terrain
  • OGS (Oil/Gas Separator) prevents cavitation High-viscosity, full synthetic Red Line shock oil for consistent performance across all temperatures
  • Synthetic formula also contains special anti-wear and lubricity agents
  • 1,000-hour salt spray corrosion resistance test on all hardware
  • Serviceable and rebuildable (factory serviced)
  • Designed, engineered, and assembled in-house from domestic and globally sourced components
  • Patented design
  • 3-year warranty

Includes:

  • SP2 3.5 aDAPT Piggyback Shocks - all 4
  • aDAPT Control Module
  • In-cab switch and wiring
  • Rear roost guards - pair
  • All necessary hardware

Vehicle Fitment Info

  • JT Gladiator (pickup)
  • 2-3 inch Lift
  • Does Not fit Mohave or EcoDiesel models

Product Notes

Does Not fit Mohave or EcoDiesel models. Bump stop configuration varies depending on shock absorber collapsed length, tire size, and fenders - See instructions for proper configuration for your application.

Configurations:

0-1.5 inch Lift (14-04-35-400-000) 2-3 inch Lift (14-04-35-400-150) 3.5-4.5 inch Lift (14-04-35-400-200)

Install Time

  • 1.5 Hours