Ford 9 Inch Quadralink C6 Floater Housing 1964.5-1966 Mustang Bare Detroit Speed

Product Description: 

Detroit Speed, Inc. Ford 9 Inch Housing with QuadraLink brackets and C6 Floater ends. This 9 inch housing is bare and can be painted or powdercoated. It is 51.250 Inch axle flange to axle flange, for the 1964.5-1966 Mustang using Detroit Speed's Quadralink suspension and Mini Tubs. Allows for a 18 x 11 wheel with 5.5 inches of backspace. Ford 9 Inch gasket, fill and drain plugs and vent included.

Detroit Speed, Inc. offers Floater Axle Housings for Street, Autocross or Track cars. Floater axles offer improved handling with predictable and consistent braking and tire contact patch. Eliminates axle deflection and greatly reduces brake knock back and offers increased bearing life.

Knock back occurs when the axle end and brake rotor deflects causing the rotor to knock the pad back pushing the caliper pistons back in the caliper away from the rotor surface. The driver must then pump the pedal to re-establish a firm brake pedal.

Detroit Speed does not offer its Floater Axles assembled.

Required Items:

  • 070570 C6/C7 floater axles (sold as a pair)
  • 070511 C6 hubs/ brake mounts and hardware

Available Options:

  • Accepts 070750 Gear FX HS series,070404 Gear FX S-series and 070700 Gear FX N-series center sections
  • 070151 Rem Deburr and Micro Polish Ring and Pinion
  • 070161 9 Inch break in on dyno service


  • Ford 9 Inch Quadralink Housing - C6 Floater - Bare
  • Made in the USA
  • Heavy duty round back housing
  • TIG welded 3 inch tubes with .218 wall thickness
  • QuadraLink brackets are TIG welded
  • Axle vent
  • Fill and drain plugs included
  • Allows for use of ABS
  • Can use with or without a parking brake
  • Bare Finish
  • Accepts C6 rear brake packages from AP, Baer or Wilwood
  • Sold Individually
  • SKU: 073030


  • 1964.5-1966 Ford Mustang


  • Axle housing only
  • We have all the complementary products to complete your axle assembly
YouTube video: