Crate Axle RockJock 44 Front JK 44 housing, 5x5, 1/2 Inch Studs 65.375 Inch WMS 5.38 Ratio

SKU:
CE-KF4401D53-DVPF
$4,364.00
Product Description: 

The RockJock 44 JK front crate axle delivers superior strength in a light-weight package that’s designed for heavy off-road use. Built to the legendary Currie Standard with reinforced center section, large diameter tubes and forged knuckles the RockJock 44 eliminates the common failure points of the stock JK front axle.

The RockJock 44 front crate axle is a direct bolt-in solution that reduces the overall cost by enabling you to retain the complete stock outer knuckle assemblies (brakes, hubs etc.) and stock wheel bolt pattern.
Built to the legendary Currie Standard with features including:

  • RockJock high-pinion nodular-iron center section with thicker walls and webbing to deliver superior strength and rigidity
  • Locker: Detroit Locker
  • Large 3 inch diameter .375 inch thick wall axle tubes that are more than twice as strong as stock
  • RockJock heavy duty forged inner knuckles, designed for use with up to 37 inch tall tires
  • Currie Performance 4340 Chromoly axles provide superior strength over OEM carbon steel axles
  • RockJock nodular-iron differential cover to defend against those unfortunate rock encounters
  • Upper control arm mounts feature rebuildable Johnny Joints for improved suspension articulation
  • Lower control arm mounts are one piece construction with integrated skid plates to help fend off bracket seeking rocks
  • Recommended maximum 37-inch tire size due to the inherent limitations of the stock brakes, wheel bearings and axle u-joints

Details:

  • Center Section: RockJock 44 high-pinion nodular-iron center section with thicker walls and webbing
  • Gear Set: Larger/stronger Dana 44 8.8 inch late model JK ring and pinion set
  • Pinion Yoke: 1350 u-joint
  • Differential Cover: RockJock nodular-iron cover with gasketed fill plug with dipstick, Red
  • Axle Tubes: 3 inch diameter, .375 wall DOM tube
  • Axles: Currie Performance 4340 chromoly inner/outer axles with 1350 u-joints
  • Knuckles: RockJock heavy duty forged inner knuckles with ball joints installed
  • Suspension Brackets: Heavy gauge 3/16 inch laser cut steel brackets
  • Control Arm Mounts: Upper control arm mounts include rebuildable Johnny Joints, Lower control arm mounts are 1 piece construction with integrated skid plate
  • Geometry: Optimized for 4 inch lift kit with 5 degrees of pinion angle to reduce driveshaft angle and 5 degrees of caster for improved steering
  • Width: 65.375 inches between wheel mounting surfaces (stock JK width)
  • Wheel Bolt Pattern: 5 on 5 inch with 1/2 inch studs (standard JK pattern)