14 Bolt Truss System Under Cover Fab

UCF 14 Bolt Truss System. This is one of those parts that are almost required when building a custom suspension on a Corporate 14 Bolt axle. It provides a rock-solid point to mount your upper suspensions links. No more welding to cast steel housings. Just set the truss body in place on the tubes, bolt-on the removable pinion support bracket (bolts to the truss body with five 1/2 inch bolts, not included) and weld the truss to the axle tubes.

The size of the link tab platform is 4 1/2 inch x 13 1/2 inch. The distance from the platform to the centerline of the axle tube is 6 3/8 inch. Laser cut from 1/2 inch thick carbon steel plate, the truss body is heavy enough for any amount of horsepower. The pinion support bracket is made from 3/8 inch steel plate.

Hardware not included. Shipped bare of paint so you can weld it on, place your link tabs, and weld it all up.
Details:

  • Hardware not included
  • Shipped bare of paint so you can weld it on
  • 1/2 inch thick carbon steel